Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Four Thirds manufacturer lens compatibility matrix — pana_ft-group-4

Four Thirds manufacturer lens compatibility matrix — pana_ft-group-4

Official Panasonic group chart: 1 named lens codes and 46 named body rows, with conditions preserved.

Reviewed by LensMatch editorial · 2026-10-30

This chart groups exactly 1 Four Thirds lens codes. Its body-row status distribution is adapter limited: 34, direct confirmed: 11, direct limited: 1. A status applies only to a named lens and body within the official matrix; an unlisted model remains unknown.

Advertisement

Lens codes and identities

Maker lens codeLens identityProfile
L-RS014150Identity not resolved to a published lens profileConsult maker chart
Advertisement

Body-row overview

Showing the first 20 of 46 named body rows. Open the official source for its full current table and footnotes. “OK” may carry lens-specific firmware, power-on or mode conditions.

Named bodyMaker codeRoute note
E-1OKSee maker scope
E-3OKSee maker scope
E-5OKSee maker scope
E-30OKSee maker scope
E-300OKSee maker scope
E-330OKSee maker scope
E-410OKSee maker scope
E-420OKSee maker scope
E-500OK(*2)See maker scope
E-510OKSee maker scope
E-520OKSee maker scope
E-620OKSee maker scope
E-P1OK(*5)Named adapter required
E-P2OK(*5)Named adapter required
E-P3OK(*5)Named adapter required
E-P5OK(*5)Named adapter required
E-P7OK(*3)(*5)Named adapter required
E-PL1OK(*5)Named adapter required
E-PL1sOK(*5)Named adapter required
E-PL2OK(*5)Named adapter required

How to use a row safely

  1. Confirm the exact maker lens code, including generation and mount.
  2. Confirm the named body ID; a similar model is not an automatic match.
  3. Apply only footnotes that explicitly name the selected lens code.
  4. Check AF area, video and stabilization in their separate feature charts.

Keep exploring

Check an exact combinationOnly resolved identities get a verdict

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.