Tiffen lists Graduated Neutral Density Attenuator/Blender 0.6 Filter as a filter product with 12 published SKU options. Read the exact option before comparing a lens thread or holder system. Maker-listed filter product family and published SKU options. A nominal size does not by itself verify front-thread pitch or optical fit.
As an Amazon Associate I earn from qualifying purchases.
Official product identity
| Field | Verified value |
|---|---|
| Maker | Tiffen |
| Maker category | neutral density |
| Maker product form | screw in |
| Listed nominal sizes | 40.5, 43.0, 46.0, 49.0, 52.0, 55.0, 58.0, 62.0, 67.0, 72.0, 77.0, 82.0 mm |
| Published SKU options | 12 |
Compare lens filters listings
Confirm the maker SKU, physical mounting system and verified lens front thread. A nominal size alone does not prove fit or freedom from vignetting.
(paid link)
Search lens filters on AmazonHow it attaches
The manufacturer lists the exact SKU options below. A nominal diameter is not automatically a verified front screw thread. Check the option’s mounting form, thread pitch or holder system and the lens’s documented front interface before selecting it.
| Maker SKU | Nominal size | Published option |
|---|---|---|
| A405CGNDBLND6 | 40.5 mm | Size: 40.5mm |
| A43CGNDBLEND6 | 43.0 mm | Size: 43mm |
| A46CGNDBLEND6 | 46.0 mm | Size: 46mm |
| A49CGNDBLEND6 | 49.0 mm | Size: 49mm |
| A52CGNDBLEND6 | 52.0 mm | Size: 52mm |
| A55CGNDBLEND6 | 55.0 mm | Size: 55mm |
| A58CGNDBLEND6 | 58.0 mm | Size: 58mm |
| A62CGNDBLEND6 | 62.0 mm | Size: 62mm |
| A67CGNDBLEND6 | 67.0 mm | Size: 67mm |
| A72CGNDBLEND6 | 72.0 mm | Size: 72mm |
| A77CGNDBLEND6 | 77.0 mm | Size: 77mm |
| A82CGNDBLEND6 | 82.0 mm | Size: 82mm |
What remains unverified
A maker’s accessory specification establishes its intended connection system. It does not guarantee no vignetting, no hood interference or fit on every lens sharing a printed diameter. Check the exact lens manual and perform a careful test.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.