Canon EF-M11-22mm f/4-5.6 IS STM is listed for Canon EF-M with APS-C coverage. A front screw-in filter size is not established by the checked evidence, so no diameter is recommended. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.
As an Amazon Associate I earn from qualifying purchases.
Verified specifications
| Field | Value |
|---|---|
| Mount | Canon EF-M |
| Image format | APS-C |
| Front filter thread | Not specified in checked source |
| Model ID | canon-ef-m11-22mm-f-4-5-6-is-stm-canon-ef-m |
| Focal length | 11–22 mm |
| Maximum aperture | f/4–5.6 |
| Weight | 7.8 oz (approx.; 220 g maker value) |
| Closest focus | 0.49 ft (approx.; 0.15 m maker value) |
| Maximum magnification | 0.3×; see maker conditions below |
| Lens AF hardware | Maker states yes |
| Optical stabilization | Maker states yes |
The reported maximum magnification is conditional: 0.30 (at 22mm). Do not substitute a 35 mm-equivalent figure or a teleconverter configuration for the bare-lens value.
Compare camera lenses listings
Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.
(paid link)
Search camera lenses on AmazonChoosing a camera
Look for the Canon EF-M designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 11–22 mm focal range and f/4–5.6 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.
Choosing a filter
A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.
This model cannot enter the diameter calculator until a verified front thread or dedicated holder specification is available.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.