Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Fujifilm XC15-45mmF3.5-5.6 OIS PZ — Fujifilm X mount and filter size

Fujifilm XC15-45mmF3.5-5.6 OIS PZ — Fujifilm X mount and filter size

Fujifilm XC15-45mmF3.5-5.6 OIS PZ: exact mount variant, image format and filter thread.

Fujifilm XC15-45mmF3.5-5.6 OIS PZ is listed for Fujifilm X with APS-C coverage. Its verified front filter size is Ø52 mm. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.

As an Amazon Associate I earn from qualifying purchases.

Advertisement

Verified specifications

FieldValue
MountFujifilm X
Image formatAPS-C
Front filter threadØ52 mm
Model IDfujifilm-xc15-45mmf3-5-5-6-ois-pz-fujifilm-x
Focal length15–45 mm
Maximum aperturef/3.5–5.6
Filter attachment typescrew_in
Weight4.8 oz (approx.; 135 g maker value)
Length1.74 in (approx.; 44.2 mm maker value)
Maximum barrel diameter62.6 mm
Maximum magnification0.24×
Optical stabilizationMaker states yes

Compare camera lenses listings

Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.

(paid link)

Search camera lenses on Amazon
Advertisement

Choosing a camera

Look for the Fujifilm X designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 15–45 mm focal range and f/3.5–5.6 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.

Choosing a filter

A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.

Keep exploring

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.