Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Fujifilm XF30mmF2.8 R LM WR Macro — Fujifilm X mount and filter size

Fujifilm XF30mmF2.8 R LM WR Macro — Fujifilm X mount and filter size

Fujifilm XF30mmF2.8 R LM WR Macro: exact mount variant, image format and filter thread.

Fujifilm XF30mmF2.8 R LM WR Macro is listed for Fujifilm X with APS-C coverage. Its verified front filter size is Ø43 mm. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.

As an Amazon Associate I earn from qualifying purchases.

Advertisement

Verified specifications

FieldValue
MountFujifilm X
Image formatAPS-C
Front filter threadØ43 mm
Model IDfujifilm-xf30mmf2-8-r-lm-wr-macro-fujifilm-x
Focal length30 mm
Maximum aperturef/2.8
Filter attachment typescrew_in
Weight6.9 oz (approx.; 195 g maker value)
Length2.74 in (approx.; 69.5 mm maker value)
Maximum barrel diameter60 mm
Closest focus0.33 ft (approx.; 0.1 m maker value)
Maximum magnification1×

Compare camera lenses listings

Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.

(paid link)

Search camera lenses on Amazon
Advertisement

Choosing a camera

Look for the Fujifilm X designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 30 mm focal range and f/2.8 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.

Choosing a filter

A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.

Keep exploring

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.