Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Leica Noctilux-M 50 f/0.95 ASPH. — Leica M mount and filter size

Leica Noctilux-M 50 f/0.95 ASPH. — Leica M mount and filter size

Leica Noctilux-M 50 f/0.95 ASPH.: exact mount variant, image format and filter thread.

Leica Noctilux-M 50 f/0.95 ASPH. is listed for Leica M with Full frame coverage. Its verified front filter size is Ø60 mm. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.

As an Amazon Associate I earn from qualifying purchases.

Advertisement

Verified specifications

FieldValue
Maker model code11602
MountLeica M
Image formatFull frame
Front filter threadØ60 mm
Model IDleica-noctilux-m-50-f-0-95-asph-leica-m
Focal length50 mm
Maximum aperturef/0.95
Filter attachment typescrew_in
Weight24.7 oz (approx.; 700 g maker value)
Length2.96 in (approx.; 75.1 mm maker value)
Maximum barrel diameter73 mm
Closest focus3.28 ft (approx.; 1 m maker value)
Maximum magnification0.05882×

Compare camera lenses listings

Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.

(paid link)

Search camera lenses on Amazon
Advertisement

Choosing a camera

Look for the Leica M designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 50 mm focal range and f/0.95 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.

Choosing a filter

A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.

Keep exploring

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.