Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Leica Summaron-M 28 f/5.6 — Leica M mount and filter size

Leica Summaron-M 28 f/5.6 — Leica M mount and filter size

Leica Summaron-M 28 f/5.6: exact mount variant, image format and filter thread.

Leica Summaron-M 28 f/5.6 is listed for Leica M with Full frame coverage. Its verified front filter size is Ø34 mm. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.

As an Amazon Associate I earn from qualifying purchases.

Advertisement

Verified specifications

FieldValue
Maker model code11695
MountLeica M
Image formatFull frame
Front filter threadØ34 mm
Model IDleica-summaron-m-28-f-5-6-leica-m
Focal length28 mm
Maximum aperturef/5.6
Filter attachment typescrew_in
Weight5.8 oz (approx.; 165 g maker value)
Length0.71 in (approx.; 18 mm maker value)
Maximum barrel diameter51 mm
Closest focus3.28 ft (approx.; 1 m maker value)
Maximum magnification0.02994×

Compare camera lenses listings

Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.

(paid link)

Search camera lenses on Amazon
Advertisement

Choosing a camera

Look for the Leica M designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 28 mm focal range and f/5.6 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.

Choosing a filter

A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.

Keep exploring

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.