Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Leica Summilux-M 35 f/1.4 ASPH. — Leica M mount and filter size

Leica Summilux-M 35 f/1.4 ASPH. — Leica M mount and filter size

Leica Summilux-M 35 f/1.4 ASPH.: exact mount variant, image format and filter thread.

Leica Summilux-M 35 f/1.4 ASPH. is listed for Leica M with Full frame coverage. Its verified front filter size is Ø46 mm. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.

As an Amazon Associate I earn from qualifying purchases.

Advertisement

Verified specifications

FieldValue
MountLeica M
Image formatFull frame
Front filter threadØ46 mm
Model IDleica-summilux-m-35-f-1-4-asph-leica-m
Focal length35 mm
Maximum aperturef/1.4
Filter attachment typescrew_in
Weight11.9 oz (approx.; 338 g maker value)
Length1.81 in (approx.; 46 mm maker value)
Maximum barrel diameter58 mm
Closest focus1.31 ft (approx.; 0.4 m maker value)
Maximum magnification0.11236×

Compare camera lenses listings

Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.

(paid link)

Search camera lenses on Amazon
Advertisement

Choosing a camera

Look for the Leica M designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 35 mm focal range and f/1.4 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.

Choosing a filter

A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.

Keep exploring

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.