Panasonic LEICA DG VARIO-ELMARIT 35-100mm / F2.8 / POWER O.I.S. is listed for Micro Four Thirds with Micro Four Thirds coverage. A front screw-in filter size is not established by the checked evidence, so no diameter is recommended. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.
As an Amazon Associate I earn from qualifying purchases.
Verified specifications
| Field | Value |
|---|---|
| Maker model code | H-ES35100 |
| Mount | Micro Four Thirds |
| Image format | Micro Four Thirds |
| Front filter thread | Not specified in checked source |
| Model ID | panasonic-leica-dg-vario-elmarit-35-100mm-f2-8-power-o-i-s-micro-four-thirds |
| Focal length | 35–100 mm |
| Maximum aperture | f/2.8 |
| Weight | 12.7 oz (approx.; 360 g maker value) |
| Closest focus | 2.79 ft (approx.; 0.85 m maker value) |
| Maximum magnification | 0.1× |
| Optical stabilization | Maker states yes |
Compare camera lenses listings
Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.
(paid link)
Search camera lenses on AmazonChoosing a camera
Look for the Micro Four Thirds designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 35–100 mm focal range and f/2.8 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.
Choosing a filter
A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.
This model cannot enter the diameter calculator until a verified front thread or dedicated holder specification is available.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.