Panasonic LUMIX G VARIO 7-14mm F4.0 ASPH. is listed for Micro Four Thirds with Micro Four Thirds coverage. A front screw-in filter size is not established by the checked evidence, so no diameter is recommended. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.
As an Amazon Associate I earn from qualifying purchases.
Verified specifications
| Field | Value |
|---|---|
| Maker model code | H-F007014E |
| Mount | Micro Four Thirds |
| Image format | Micro Four Thirds |
| Front filter thread | Not specified in checked source |
| Model ID | panasonic-lumix-g-vario-7-14mm-f4-0-asph-micro-four-thirds |
| Focal length | 7–14 mm |
| Maximum aperture | f/4 |
| Filter attachment type | none |
| Weight | 10.6 oz (approx.; 300 g maker value) |
| Length | 3.27 in (approx.; 83.1 mm maker value) |
| Maximum barrel diameter | 70 mm |
| Closest focus | 0.82 ft (approx.; 0.25 m maker value) |
Compare camera lenses listings
Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.
(paid link)
Search camera lenses on AmazonChoosing a camera
Look for the Micro Four Thirds designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 7–14 mm focal range and f/4 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.
Choosing a filter
A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.
This model cannot enter the diameter calculator until a verified front thread or dedicated holder specification is available.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.