Tamron 18-200mm F/3.5-6.3 Di II VC (B018) — Nikon F is listed for Nikon F with Unknown coverage. Its verified front filter size is Ø62 mm. Manufacturer global specification confirms this mount variant and filter thread. US availability and exact body functions are not established here. This maker listing marks the mount as end of sale.
As an Amazon Associate I earn from qualifying purchases.
Verified specifications
| Field | Value |
|---|---|
| Mount | Nikon F |
| Image format | Unknown |
| Front filter thread | Ø62 mm |
| Model ID | tamron-b018-nikon-f |
| Optical construction | 16 elements in 14 groups |
| Closest focus | 0.49m/19.3 in. (at 180mm) 0.77m/30.3 in. (at 35mm) [at f=18, 200mm: 0.5m /19.7 in.] |
| Maximum magnification | 1:4 (at f=200mm: MOD 0.5m) |
| Minimum aperture | F22-40 |
| Aperture blades | 7 (circular diaphragm)*2 |
The maker also lists 16 elements in 14 groups for the optical design and a closest-focus specification of 0.49m/19.3 in. (at 180mm) 0.77m/30.3 in. (at 35mm) [at f=18, 200mm: 0.5m /19.7 in.]. These are lens specifications, not a guarantee of performance on every body or in every shooting mode.
Compare camera lenses listings
Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.
(paid link)
Search camera lenses on AmazonChoosing a camera
Look for the Nikon F designation on the camera specification, then verify the exact model code and mount variant against its support page. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.
Choosing a filter
A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.