Tokina SZ 8mm F2.8 EF-M FISH-EYE is listed for Canon EF-M with APS-C coverage. A front screw-in filter size is not established by the checked evidence, so no diameter is recommended. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.
As an Amazon Associate I earn from qualifying purchases.
Verified specifications
| Field | Value |
|---|---|
| Maker model code | SZ 8mm F2.8 EF-M FISH-EYE |
| Mount | Canon EF-M |
| Image format | APS-C |
| Front filter thread | Not specified in checked source |
| Model ID | tokina-sz-8mm-f2-8-ef-m-fish-eye-canon-ef-m |
| Focal length | 8 mm |
| Maximum aperture | f/2.8 |
| Filter attachment type | none |
| Weight | 9.9 oz (approx.; 280 g maker value) |
| Length | 2.05 in (approx.; 52 mm maker value) |
| Maximum barrel diameter | 60 mm |
| Closest focus | 0.33 ft (approx.; 0.1 m maker value) |
| Maximum magnification | 0.1× |
| Lens AF hardware | Maker states no |
Compare camera lenses listings
Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.
(paid link)
Search camera lenses on AmazonChoosing a camera
Look for the Canon EF-M designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 8 mm focal range and f/2.8 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.
Choosing a filter
A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.
This model cannot enter the diameter calculator until a verified front thread or dedicated holder specification is available.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.