Voigtländer HELIAR-HYPER WIDE 10mm F5.6 Aspherical is listed for Sony E with Full frame coverage. A front screw-in filter size is not established by the checked evidence, so no diameter is recommended. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.
As an Amazon Associate I earn from qualifying purchases.
Verified specifications
| Field | Value |
|---|---|
| Maker model code | HELIAR-HYPER WIDE 10mm F5.6 Aspherical |
| Mount | Sony E |
| Image format | Full frame |
| Front filter thread | Not specified in checked source |
| Model ID | voigtlander-heliar-hyper-wide-10mm-f5-6-aspherical-sony-e |
| Focal length | 10 mm |
| Maximum aperture | f/5.6 |
| Filter attachment type | none |
| Weight | 13.2 oz (approx.; 375 g maker value) |
| Closest focus | 0.98 ft (approx.; 0.3 m maker value) |
| Lens AF hardware | Maker states no |
Compare camera lenses listings
Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.
(paid link)
Search camera lenses on AmazonChoosing a camera
Look for the Sony E designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 10 mm focal range and f/5.6 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.
Choosing a filter
A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.
This model cannot enter the diameter calculator until a verified front thread or dedicated holder specification is available.
Keep exploring
Official sources and scope
Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.