Evidence-led camera gear reference · US edition
L↔MLensMatch
Home › Voigtländer PORTRAIT HELIAR 75mm F1.8 — Nikon Z mount and filter size

Voigtländer PORTRAIT HELIAR 75mm F1.8 — Nikon Z mount and filter size

Voigtländer PORTRAIT HELIAR 75mm F1.8: exact mount variant, image format and filter thread.

Voigtländer PORTRAIT HELIAR 75mm F1.8 is listed for Nikon Z with Full frame coverage. Its verified front filter size is Ø62 mm. The supplied research links this exact mount variant to manufacturer evidence. Body-specific AF, crop and adapter behavior remain separate checks.

As an Amazon Associate I earn from qualifying purchases.

Advertisement

Verified specifications

FieldValue
Maker model codePORTRAIT HELIAR 75mm F1.8
MountNikon Z
Image formatFull frame
Front filter threadØ62 mm
Model IDvoigtlander-portrait-heliar-75mm-f1-8-nikon-z
Focal length75 mm
Maximum aperturef/1.8
Filter attachment typescrew_in
Weight20.5 oz (approx.; 580 g maker value)
Maximum magnification0.135135×
Lens AF hardwareMaker states no

Compare camera lenses listings

Compare the exact model code and rear mount in each listing. Amazon results may contain another mount or generation; the search is not a compatibility verdict.

(paid link)

Search camera lenses on Amazon
Advertisement

Choosing a camera

Look for the Nikon Z designation on the camera specification, then verify the exact model code and mount variant against its support page. The maker lists a 75 mm focal range and f/1.8 maximum aperture. A physical mount match is a starting point; still AF, movie AF, crop behavior, stabilization and firmware need separate checks.

Choosing a filter

A circular screw-in filter with a matching documented thread size is only a mechanical candidate. Magnetic filters, wide frames and stacked rings need separate system and vignetting checks. When no front thread is specified, do not buy a size from the focal length or barrel diameter.

Keep exploring

Official sources and scope

Checked for this reference on October 30, 2026. Product firmware and support lists can change; inspect the current maker page for your exact revision.